Description

Audio-Technica ES8766RC 5-Pin Desk Stand Power Module Overview:

The ES8766RC desk stand power module works with ES925 goosenecks and microphone elements. The desk stand features a 5-pin TB5M-type output connector, heavy die-cast construction, and no-slip bottom pads to minimize coupling of surface vibration to the microphone. It is equipped with a touch-sensitive capacitive-type user switch with local and remote switching options. Locally, it can be set to any one of three operating modes: touch-on/touch-off, touch-to-talk and touch-to-mute. For enhanced control in conference and boardroom installations, the units external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The desk stand is also equipped with a highly visible, two-state RGB LED status indicator and a UniSteep filter that provides steep low-frequency attenuation to improve sound pickup without affecting vocal reproduction quality.

Features:

• 5-pin desk stand power module for use with ES925 goosenecks and microphone elements
• Logic I/O capability permits control of remote devices from the desk stands touch-sensitive capacitive-type user switch
• Capacitive touch switch can be set to any one of three operating modes: touch-on/touch-off, touch-to-talk and touch-to-mute
• Equipped with highly visible, two-state RGB LED status indicator
• Integral UniSteep filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Heavy die-cast construction and no-slip bottom pads minimize coupling of surface vibration to the microphone

Specifications:

• Low-Frequency Roll-Off:80 Hz, 18 dB/octave
• Impedance:130 ohms
• Switches:Activation: on/off
• LED Color:mic on, mic off
• Switch function:touch on/off, momentary on, momentary off
• Control:local, remote, LED remote
• Low cut:on/off
• Phantom Power Requirements:22-52V DC
• Contact Closure:Closure input voltage: -0.5 5.5V
• Maximum permissible power:200 mW
• On-resistance:100 ohms
• LED control:Active high (+5V DC) TTL compatible
• Active low voltage:1.2V or lower
• Maximum permissible input power:-0.5 5.5V
• Maximum permissible power:200 mW
• Weight:640 g (22.6 oz)
• Dimensions:97.0 mm (3.82″) W x 130.0 mm (5.12″) D x 33 mm (1.30″) H
• Output Connector:TB5M-type
• Accessories Furnished:7.6 m (24.9′) microphone cable (TA5F, unterminated); set screw (M2 x 2); hex wrench