Description

Presonus Eris E5 XT 2-Way Active Studio Monitors with Wave Guide – Pair With Polishing Cloth, 2x TRS Cables & Bitwig Software

Presonus Eris E5 XT 2-Way Active Studio Monitors with Wave Guide – Pair Overview:

The Eris E5 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.

Studio speakers with a wide sweet spot.
A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. Its ideal for group listening and collaborationwhile narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Lows that go lower.

The familiar woven composite low-frequency driver still offers Eris’ signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That’s 10 Hz below previous modelswith no subwoofer required!

Set up your studio monitors for your room.

Acoustic tuning controls allow you to configure the Eris E5 XT perfectly for your roomyou get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Features:

Components and construction

• 5.25-inch woven composite low-frequency transducer
• 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
• Front-firing acoustic port for superior bass-frequency reproduction
• Optimized, resonance-suppressing internal bracing
• 102 dB maximum continuous SPL

User controls

• HF Adjust (6 dB, continuously variable)
• Midrange Adjust (6 dB, continuously variable)
• Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
• Highpass filter (Off, 80 Hz, 100 Hz)

Power and safety

• 70 watt, Class AB biamplification
• RF interference, output current limiting, over-temperature, transient, and subsonic protection
• Amplifier soft start feature eliminates popping on power-up
• Internal power supply with IEC connector
• Power switch with on/off LED

Inputs and outputs

• Balanced XLR/-inch
• Unbalanced RCA inputs

Specifications:

Inputs

• 1- Balanced XLR
• 1- Balanced TRS
• 1- Unbalanced RCA

Performance

• Frequency Response : 48 Hz – 20 kHz
• Crossover Frequency : 3 kHz
• LF Amplifier Power : 45W
• HF Amplifier Power : 35W
• Peak SPL (@ 1 meter) : 102 dB
• LF Driver : 5.25
• HF Driver : 1 silk dome
• Input Impedance : 10 k
• Dispersion : 100 degrees horizontal by 60 degrees vertical

User Controls

• Volume Range : A-type taper
• MF Control : -6, 0, +6 dB
• HF Control : -6, 0, +6 dB
• Low Cut : Flat, 80 Hz, or 100 Hz
• Acoustic Space : Flat, -2 dB, or -4 dB

Protection

• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

Power

• 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

• Vinyl-laminated, medium-density fiberboard

Physical

• Width : 8 (203.2 mm)
• Depth : 9 (228.6 mm)
• Height : 11 (279.4 mm)
• Weight : 11 lbs (4.99 kg)

TRS to TRS Balanced Cable – 3 Metres:

Features:

• TRS-TRS Speaker Cable
• 3 Metres

Microfiber Guitar/Instrument Polishing Cloth:

The Microfiber Polishing Cloth is made of 80% polyester and 20% nylon. One strand is 10 times finer than silk and 100 times smaller than a human hair. Microfiber is preferred for its very lightweight, super absorbency, and rapid drying properties. The polishing cloth rapidly absorbs up to 7 times its weight in moisture and can be used safely on any surface. Polishes your guitar to a brilliant shine.

Note: Using a microfiber cloth is essential while cleaning or polishing your guitar, because any regular cloth can damage the finish.

Colour of the cloth may vary from the picture.*

“BITWIG 8-TRACK
The Compact Edition of Next Generation Workflow

Bitwig 8-Track, the trim and effective digital audio workstation to start producing, performing, and designing sounds like a pro. 8-Track includes the entire collection of Bitwig Studio devices for use on up to eight project tracks with audio or MIDI.

Bitwig 8-Tracks unified mapping system allows you to modulate any device or VST parameter using macro controls and modulator devices. Explore a new world of creative possibilities, including audio and note expressions, histogram-based value editing, layered editing, extensive bounce-in-place functions, automatic slicing, smart controller integration, and the Open Controller Scripting API. Every feature in Bitwig 8-Track is developed by musicians, for musicians.”
“As the name suggests, this book has been written for the absolute beginner
and assumes no prior musical knowledge – just the desire to do it! The
contents are suitable for piano and / or electronic keyboard.
Items covered include:
Understanding keyboard or piano
Studying notes
Easy, effective finger exercises
Major scales
Chords
After completing this book, you will have a good basic understanding of
music theory as well as a good basic playing technique, paving the way for
more advanced study in your chosen field”

Made in China